One Cut is water-based with low dust technology inside which allows for longer buffing cycles.

Recommended speed for dual-action polishing machines varies from 3 to 5 and for rotary polishing machines we recommend staying within 800-1200 RPM range.

Silicone and fillers free therefore it is safe to use on a vehicle that will be coated afterwards.

If you are looking for a professional grade product for professional grade results then this is a great choice!

Works with both – dual-action and rotary polishing machines

Ewocar One Cut was designed to deliver outstanding results in simple and efficient manner. One Cut is a perfect solution for busy detailing shops where speed and precision matters. In just one simple polishing cycle you will restore gloss and bring back clarity to your old and clear coated paint. Highly efficient diminishing abrasive paste formula combined with Ewocar Red Medium pad can easily remove up to P2000 sanding marks. Ewocar One Cut will safely remove light to moderate scratches, swirl-marks & holograms, leaves the paintwork extremely glossy, swirl-free and smooth to the touch. After the polishing cycle simply wipe off the polished area with a clean Ewocar microfiber towel in a slow circular motion. If you are unsatisfied with the results you can repeat the process until the desired finish has been achieved.

If you are looking for a professional grade product for professional grade results then this is a great choice! Works with dual-action or rotary polishing machines.

This mixture is not classified as hazardous in accordance with Regulation (EC) No. 1272/2008. Safety data sheet available on request.